Electia CTC 1132 - Siren Delay

CTC-1132 868AM 2007.07.18
14
2. A. Exit Sound
This is for you to decide whether the Control
Panel will sound short beeps during the Exit
Delay period when in Away Arming.
E x i t S n d O n
E x i t S n d O f f
z Press “ S “ & “ T “ keys to select the
option. Options available are “On” for Exit
Sound and “Off” for no entry sound
z Press “OK” to confirm
z “Exit Snd On” (Exit sound On) is set as
factory default.
3. A. Entry Sound
This is for you to decide whether the Control
Panel will sound short beeps during the Entry
Delay Period when Away Arming.
E n t r y S n d O n
E n t r y S n d O f f
z Press “ S “ & “ T “ keys to select the
option.
z Press “OK” to confirm.
z “Entry Snd On” (Entry Sound On) is set as
factory default.
4. H. Exit Sound
This is for you to decide whether the Control
Panel will sound short beeps during the Exit
Delay period when Home Arming.
E x i t S n d O n
E x i t S n d O f f
z Press “ S “ & “ T “ keys to select the
option.
z Press “OK” to confirm
z “Exit Snd On” (Exit sound On) is set as
factory default.
5. H. Entry Sound
This is for you to decide whether the Control
Panel will sound short beeps during the Entry
Delay Period when Home Arming.
E n t r y S n d O n
E n t r y S n d O f f
z Press “ S “ & “ T “ keys to select the
option.
z Press “OK” to confirm.
z “Entry Snd On” (Entry Sound On) is set as
factory default.
6. Siren Delay
This is for you to decide how long should the
Control Panel suppress all audible alarms after
an Burglar alarm is reported. Options are
“OFF” and 1-min delay to 10-min delay in
increments of 1 minute
Off
1 Min .
2 Min .
3 Min .
4 Min .
to
10 Mi n .
z Press “ S “ & “ T “ keys to select the
option.
z Press “OK” to confirm.
z “Off” is set as factory default.
7. Verification
Turn on and off the Sequential Verification
Reporting.
S e q . V e r i f . O f f
S e q . V e r i f . O n
z Press “S” & “T” keys to select the option.
z Press “OK” to confirm.
z “Seq.Verif.Off” (Sequential Verification Off)
is set as factory default.
<
<
N
N
O
O
T
T
E
E
>
>
) For detailed description of this feature,
please refer to Sec. X, “False Alarm
Management” of “Configuring your
system”
8. Final Door
Turn on and off the Final Door Set Option.