a t e r
If no changes is wished here, press
“
“ to skip to Step 3A.
Step2A. Use “S”,“T” keys to scroll the display
and choose the desired device
attribute by pressing “OK”. The
screen will show:
Z o n e T y p e ? ( O k ? )
D C B a c k d o o r E
Step3A. Press “OK” to confirm. The next
screen will ask if you want to change
the name
P r o g r a m N a m e ?
B a c k d o o r
Step4A. Press “
“, if re-naming is not
required to exit to the previous device
list or press “OK” if you wish to edit
the zone name:
E n t e r N a m e + O k
. . . . . . . . . . .
Step5A. Edit the zone name and press “OK”
when completed to return to the
previous device list.
Step6A. Proceed to edit other devices or Press
“ ” to return to “Add/Delete Device”
menu.
To Edit Other Devices (SD/ KP/ WS/NS)
Step1B. Use “S”,“T” keys to scroll the display
and choose the desired device for
editing. When selected by pressing
“OK”, the first screen will ask if you
want to change the zone name. To
confirm, press “OK” or press “ “ to
exit.
P r o g r a m N a m e ?
B a c k d o o r
Step2B. Press “OK” if you wish to edit the
zone name:
Ent er N a me + Ok
....... . . .
or press “ “ to exit to the previous
device list.
Step3B. Edit the zone name and press “OK”
when completed and return to the
previous device list.
Step4B. Proceed to edit other devices or Press
“ ” to return to “Add/Delete
Device” menu.
3. Remove Devices
Adding a device a second time is prohibited
unless it is removed from the system first. To
delete a device, choose “Remove Device” in
the “Device +/-“ menu
Step 1. Use “S”,“T” keys to scroll the display.
All the used zones with the device
names are listed in order of the zone
numbers.
D C B a c k d o o r
IR Ha l l w a y
RC MR . S M I T H
S D K i t c h e n
Step 2. Press “OK” when the required device
is chosen. The following prompt
message will be displayed for you to
reconfirm.
R e m o v e : ( O k ? )
RC MR.S M I T H
Step 3. Press “OK”. Deleting a device is now
completed. The screen returns to
previous device list.
<
<
N
N
O
O
T
T
E
E
>
>
) If the selected sensor/zone is not what
you want to delete, press “ “ to exit,
the device list is again displayed for
you to make another selection.
) If “Remove Device” menu is chosen
while no device has been installed,
the display will show “No device
found in system” for 2 sec. and
return to the “Device +/- “ menu.
Step4. Proceed to remove other devices or
Press “ ” to return to “Add/Delete
Device” menu.
To Next Page
Loading...