Electrolux DIVA 60 - Sequence of Operations

SOI/DT 2003 - 01 eb 12 599 35 63-72
4.7 Sequence of operations
1. Close the door.
2. Press S0 to switch the appliance on.
 The pilot lamp L0 lights.
3. Select the desired programme.
 The display shows the time-to-end or the
programme no. flashing.
 The phase LEDs light.
SELECTING THE CYCLE
4. Within 3 seconds select the possible
delayed start or the desired option (if
featured)
START
5. Automatically, 3 seconds after the last
pressure of a button, the cycle starts.
 The digits and the current phase LED
light steady.
6. The time-to-end decreases every minute
and is updated after every cycle phase.
 The LED indicates the current phase.
7. To interrupt a current programme:
 Switch the appliance off with S0 (or open
the door)
 To start it again, press S0 (and close the
door)
EXECUTION OF THE CYCLE
8. To cancel a current programme:
 Press S2 – S3 simultaneously for about 2
seconds.
9. At the end of the programme:
 The buzzer sounds at intervals.
 The END OF CYCLE LED lights.
 The display shows [0].
END
10. Press S0 to switch the appliance off.