SOI/DT 2003 -01 eb 31 599 35 63-72
10.5 Options available to Service Engineers
In particular circumstances, i.e. if the user reports unsatisfactory washing results, a special procedure,
available only to Service Engineers, can be used to select two supplementary options designed to improve
performance:
• Extra cold rinse.
• Disabling of pulse washing (PW), replaced by continuous washing (Ctrl).
10.5.1 Selecting the extra cold rinse option
Using the procedure described below, it is possible to add a supplementary cold rinse in all the washing
programmes. This improves the quality of the rinse in case of necessity.
1. Access diagnostics mode (see 10.1).
2. Press buttons S1-S2 simultaneously.
The display indicates the status of the function: [ 0A ] extra rinse not selected, [ 1A ] extra rinse active.
3. Press button S1 to activate and disactivate this function.
[ 0A ] extra rinse not selected, [ 1A ] extra rinse selected.
4. To store the operation in memory: press key S0 and switch the appliance off; alternatively, wait for 60
seconds (appliance in selection mode).
To Next Page
Loading...
