43
The conv convert option allows you to convert any
normal baking recipe using the convection bake
feature. The control uses the normal recipe settings
andadjuststoalowertemperatureforconvection
baking.ConvconvertmustbeusedwithCONV
BAKEfeature.
Using convection convert Setting convection convert
Benetsofconvbakeusingconv
convert option:
• Superiormultipleovenrackperformance.
• Somefoodscookup25to30%faster,saving
time and energy.
• Nospecialpansorbakewarerequired.
• Place food items using the recommended rack
positions. When baking with a single rack use
rack positions 3 or 4. When using 2 racks use
rackpositions2&6.Whenusing3racksuse
rackpositions1,4&7.
• Cookiesandbiscuitsshouldbebakedonpans
with no sides or very low side to allow heated air
to circulate around the food.
• Foodbakedonpanswithadarknishwillcook
faster.
• Whenplacingmultiplefooditemsintheoven
allow2-4”(5-10cm)ofspacebetweenthefood
items for proper air circulation.
For best results
• YoumaypressCANCELanytimewhen
setting the control or during the cooking
process.
NOTE
OnceCONV CONVERT is pressed the oven
display shows PRE-HEATING. After the oven
reaches the converted set temperature, PRE-
HEATING will turn off and a beep will indicate the
oven is ready.
The added conv convert option will automatically
lower the set temperature you set from the bake
recipetoanadjustedconvbaketemperature.
When conv convert is used with cook time “CF”
(Check Food) will be displayed when the cook
time is 75% complete. The control will also beep at
regularintervalsuntilbakinghasnished.
See the example below to set conv bake, starting
immediately with the auto-suggest (default) setting
of 350°F (176°C) and adding the conv convert
option.
To add or change any cook settings after this
feature has started:
• SelecttheLOWERoven.Maketemperature
changes using the + or - keys. Each press of +
or -willadjustthetemperatureby5°F(or2°C).
• Ifchangingcookingtimes,selectthecook
duration or end time keys needed to make the
changes.
Example
Step Press
1. Press LOWER OVEN
2. Press CONV BAKE
3. Press CONV CONVERT
4. Press START
Setting Lower Oven Controls