23
SECTION B - Washer & Dryer
Pedestal Installation Instructions
IMPORTANT: Read and save these
instructions.
This kit is intended to be installed
by persons having electrical and
mechanical training and a level of
knowledge considered acceptable
in the appliance repair trade.
Your safety and the safety of others are very
important. Many important safety messages
are provided in these instructions and on
your appliance. Always read and obey all
safety messages.
WARN I NG
EXCESSIVE WEIGHT HAZARD
Two or more people may be required to move and
install the washer & dryer onto pedestals.
Failure to comply may cause back or other injury.
Tools needed:
level
7/16” open end wrench or ratchet &
socket
9/16” open end wrench
adjustable wrench
#2 Phillips screwdriver
flat blade screwdriver
WASHER INSTALLATION
Washer Installation Kit
1. Remove the washer installation hardware from
the plastic bag.
2. Attach the rear brackets to the pedestal with four
#8 screws (2 per bracket).
To Next Page
Loading...
