Eliet Super Prof - Page 26

26
English
Warning:
Before starting up the machine, make sure to wear the ear defenders supplied
as standard.
• Ensure the shredding chamber and the Axelero
TM
are empty. This is to avoid starter mechanism
overloading.
• Be sure the shredder hopper is empty (no tools…).
Standard version
• Move the throttle (1) to the max. (=hare) position.
• Close the valve (choke) (2) by pulling the knob.
• Turn the ignition key (3) to the ON position, and check if the LCD-screen (4) lights up. This way
you are able to check the operation of the LCD-screen.
• Turn the key to position 2, the start motor cranks the engine .
• Release the key when the engine starts.
• After 3 to 4 seconds, push the button of the Choke (2) valve slowly back in.
• At ELIET, we recommend to keep maximum engine speed at 3,200 rpm. Check to ensure that
the motor is achieving the revolutions indicated when running at full gas. Never try to modify
the engine speed yourself.
Switching off the engine :
• Move the throttle control lever (1) to low speed (= tortoise).
• Turn the ignition key (3) to the 0FF position and remove from the ignition switch
• Store the key in a safe place away from children and unauthorised persons.