72
English
11.5.8 Maintenance after 200 hours (or annually)
Caution:
Before performing any maintenance, stop the engine and remove the key from
the ignition switch. Wear suitable clothing.
• Maintenance after 100 hours (read “11.5.7 Maintenance after 100 hours (or six-monthly)” on
page 71).
• Air filter change (read “11.3.4 Cleaning the air filter (Clean air filter)” on page 49).
• Change RESIST
TM
blades (read”11.4.3 Reversing and renewing the shredding knives (Turn Kni-
ves)” on page 55).
• Changing the hydraulic oil + replacing filter (read “11.3.8 Changing the hydraulic oil filter (Hy-
draul. filter)” on page 51 en “” op pagina 51).
• Replacing air filter (read “11.3.5 Changing the air filter” on page 49.
• Changing the engine fuel filter (read “11.3.6 Changing the engine fuel filter (Oil filter)” on page
50).
• Changing spark plugs (read the engine manual).
• Checking the tracks (read “11.4.8 Checking and adjusting the tracks for correct tension (Cross
Country model)” on page 63).
After performing maintenance or a repair, make sure that you correctly refit ALL guards.