Eliet Super Prof - Maintenance after 25 Hours; Maintenance after 50 Hours; Maintenance after 100 Hours (or Six-Monthly)

71
English
11.5.5 Maintenance after 25 hours
Caution:
Before performing any maintenance, stop the engine and remove the key from
the ignition switch. Wear suitable clothing.
• Daily maintenance (read “11.5.2 Daily maintenance” on page 70).
• Change the engine oil (read “11.3.2 Engine oil change (Engine Oil)” on page 48).
11.5.6 Maintenance after 50 hours
Caution:
Before performing any maintenance, stop the engine and remove the key from
the ignition switch. Wear suitable clothing.
• Daily maintenance (read “11.5.2 Daily maintenance” on page 70).
• Check the belt tension (read “11.4.4 Checking the drive belt for correct tension (Chk Belt
Tens.)” on page 60).
• Reverse blades (read “11.4.3 Reversing and renewing the shredding knives (Turn Knives)” on
page 55.
• Check the chain tension and, if necessary, adjust the tension. (read “11.4.7 Checking the tension
of the drive chain for the feed roller” on page 63).
• General lubrication (read “11.4.9 General lubrication (Lubrication)” on page 64).
11.5.7 Maintenance after 100 hours (or six-monthly)
Caution:
Before performing any maintenance, stop the engine and remove the key from
the ignition switch. Wear suitable clothing.
• Daily maintenance (read “11.5.2 Daily maintenance” on page 70).
• Maintenance after 50 hours (read “11.5.6 Maintenance after 50 hours” on page 71).
• Reverse RESIST
TM
blades (read”11.4.3 Reversing and renewing the shredding knives (Turn
Knives)” on page 55).
• Replace the oil filter (read “11.3.3 Changing the oil filter (Oil filter)” on page 48).