Eliet Super Prof - Daily Maintenance; Maintenance after 5 Hours; Maintenance after 10 Hours

70
English
11.5.2 Daily maintenance
Caution:
Before performing any maintenance, stop the engine and remove the key from
the ignition switch. Wear suitable clothing.
• Check for signs of leakage.
• Open the shredding chamber (read”11.2.5 Opening the shredding chamber” on page 43).
• Clean the machine (read “9.7 Cleaning the machine” on page 36).
• Inspect the blades, and if necessary, sharpen them (read “11.4.1 Checking the blades” on page
52).
• Check the machine for signs of abnormal wear or fractures.
• Check the Axelero
TM
for signs of abnormal wear or fractures.
• Check the bolts for correct tightness. (Blades, wheels, bearings, engine,…).
• Check the oil level in the engine crankcase (read “11.3.1 Checking the oil level in the engine
crankcase + refilling” on page 47).
11.5.3 Maintenance after 5 hours
Caution:
Before performing any maintenance, stop the engine and remove the key from
the ignition switch. Wear suitable clothing.
• Daily maintenance (read “11.5.2 Daily maintenance” on page 70).
• Clean the air filter (read “11.3.4 Cleaning the air filter (Clean air filter)” on page 49).
11.5.4 Maintenance after 10 hours
Caution:
Before performing any maintenance, stop the engine and remove the key from
the ignition switch. Wear suitable clothing.
• Daily maintenance (read “11.5.2 Daily maintenance” on page 70).
• Inspect the blades, and if necessary, sharpen them (read “11.4.1 Checking the blades” on page
52).