Eliet Super Prof - Maintenance Schedule

68
English
11.5 Maintenance schedule
The dashboard display will show (top right hand corner) how many hours the machine can run
before a certain service must be carried out.
(Next Service: ...h) You can scroll through the maintenance menu using the arrow keys on the
dashboard. This list is sorted in ascending order according to maintenance interval. If you exceed
the time for a particular service, that software will indicate a maintenance alarm and the Alarm
LED will light up. The maintenance menu will now show “Service Now” next to the maintenance
timer that has been exceeded.
Shredding hours Engine hours
Daily “11.5.2 Daily maintenance” on page 70
5 Clean air filter
“11.3.4 Cleaning the air filter (Clean air
filter)” on page 49
10 Check knives
“11.4.1 Checking the blades” on page
52
25 Engine oil
“11.3.2 Engine oil change (Engine Oil)” on
page 48
50 Check belt tension
“11.4.4 Checking the drive belt for
correct tension (Chk Belt Tens.)” on
page 60
Oil filter
“11.3.3 Changing the oil filter (Oil filter)”
on page 48
100 Turn knives
“11.4.3 Reversing and renewing the
shredding knives (Turn Knives)” on
page 55
Lubrication
“11.4.9 General lubrication (Lubrication)”
on page 64
200 Replace knives
“11.4.3 Reversing and renewing the
shredding knives (Turn Knives)” on
page 55
Replace belts
“11.4.6 Changing the belts (Replace
Belts)” on page 62
Change air filter
“11.3.5 Changing the air filter” on page
49
500 Hydraul. Filter
“11.3.8 Changing the hydraulic oil filter
(Hydraul. filter)” on page 51
Hydraul. Oil
“11.3.7 Changing the hydraulic oil” on page
50