39
English
• Always apply the parking brake on the machine.
• Do not forget that the machine has a high centre-of-gravity. Therefore use ropes to secure
both sides of the machine to the vehicle. This ensures that the machine is not toppled over
when the vehicle goes around a bend.
• Do not overload the vehicle. Read “14. Equipment specifications” on page 75 for the exact
weight of the shredder.
Warning:
Under no circumstances should the machine be used if the blow chute is in
transport mode. The chippings could be blown out in the direction of the
operator and cause serious injury.
• Make sure to properly secure the machine to the vehicle during transportation. Use the fixed
parts of the vehicle frame to attach ropes. Two eyes are provided at the front in order to se-
cure the unit. Four eyes are provided at the back of the chassis.
To Next Page
Loading...
