SECTION 2
CONTROLLING AND CUSTOMIZING CYTOCENTRIFUGE FUNCTIONS
2.2 Recording Specimen and Slide Information
Manually Entering Specimen Information
With Cyto Slide Tracking and Manual Entry enabled in the Tracking menu:
1 Press Load Slides on the Main Menu.
2 Press Add to reveal the keypad.
3 Enter slide information (maximum of 24 characters) and/or specimen
information (using the ID accompanying the specimen) and press Return.
4 To change or delete the entry, select the entry on the display and press Edit or
Remove.
5 Load slides and run cytocentrifuge cycle as shown in Section 3.
To Next Page
Loading...
