SECTION 3
OPERATING THE CYTOCENTRIFUGE
3.1 Running a Cytocentrifuge Cycle
Attaching Cytopads to Chambers
To reuse a chamber, attach a new Cytopad after the chamber is cleaned, disinfected, and
thoroughly dried.
To assemble Cytopads with sample chambers:
1 Place a Cytopad inside a chamber frame, using the indexing pins for correct
positioning.
2 Snap the frame over the chamber base. Be sure the sample chamber base is
securely seated in the frame.
WARNING!
Dispose of all used chambers or Cytopads according to local regulations and
prudent laboratory practices.
To Next Page
