General
© Elma GmbH & Co KG SM/Transsonic_LC/1104/D
3
1 General
Carefully read the Service Manual before you carry out any
repair works, in particular the Important safety warnings, section
1.4.
We reserve the right to carry out technical modifications on the
units due to advanced development.
Reprints, translations and copying of any kind, even of parts of
the document, are subject to prior written authorization by the
editor.
The copy right remains with the editor.
1.1 How to use the Service Manual
For trouble shooting we recommend to use the table of possible
faults on the relevant type of unit (section 4).
Further useful information on initial operation, trial runs and
standard operation can be found in section 2, Important
operation instructions and section 17, Putting into operation /
Trial runs.
In case of any further queries ELMA will be glad to assist. For
our technical support and contact address please see the last
page.
1.2 Contents of the Service Manual
Carefully read and observe before you carry out any repair
works.
Description of operating elements and unit features.
Instructions on the intended use and operation of the present
unit.
Table of faults, possible causes and remedies for the different
unit types (no guarantee on completeness).
Easy-to-follow instructions on the replacement of faulty
components; individual unit types are listed separately where
necessary.
Instructions on initial operation / putting into operation, cleaning
media, heating of the cleaning liquid, etc.
Annex A contains circuit diagrams for each unit type showing
the relevant data (mains voltage, ultrasonic frequency).
Annex B contains the spare parts lists, divided into separate
lists for each unit type. The lists show the standard spare parts.
Should you require any further components, please contact the
manufacturer.
Safety warnings
Product description
Operation
Trouble shooting
Repai
Putting into
operation / Trial run
Circuit diagrams
Spare parts lists
To Next Page
Loading...
