Important operating instructions
6
SM/Transsonic_LC/1104/D © Elma GmbH & Co KG
2 Important operating instructions
Carefully read and observe before reoperation and
inspection of the unit!
The present Elma ultrasonic cleaning unit has been designed
for the treatment of items and liquids only.
Check the unit and the mains cable for transport damages. In
case of visible damage do not operate the unit!
Place the unit on a dry and solid surface; ensure that the
workplace is sufficiently ventilated. Keep workplace, unit
housing and operating elements dry. Protect the unit from
entering humidity!
Fill the cleaning tank with a sufficient quantity of a suitable
cleaning liquid before switch-on. Do not use flammable liquids
directly in the cleaning tank: risk of fire and explosion!
100 – 120V / 220 – 240V
1 phase / 1 N / 1 PE shockproof grounded socket
For any queries please contact the manufacturer.
Intended use
Check for damage
Placement
Cleaning liquid
oltage variants
Mains connection
To Next Page
Loading...
