27
VARIOUS
FUNCTIONS AND
OPERATIONS
English
P
1~
P
32
Image selection
The camera image and the image inputted in the RGB input terminal [RGB IN] can be
switched by pressing the [CAMERA] button and the [PC] button respectively.
By using these functions, output images can be switched without disconnecting cables.
Note
• The [PC] button can not be used when the dip switch is set to VIDEO.
• When using a laptop PC with external output selection equipped, set the output
mode of the PC to “external” after pressing the [PC] button on the main unit.
To Next Page
Loading...
Need help?
General
