ELNA 7300 - Using Permanent Memory to Save Sequences; Saving Memory; Overwriting Saved Memory

156
How to Preview the Combined Sequence
(Utility, Satin, Decorative or Letters)
Program the following stitches using the “ENTER”
key: 519, 094, 523, 535, 327, 357, 345, 348 and 356.
The LCD screen will show a maximum of 8 stitches
at one time. The ARROW symbol q located under
the sequence indicates that there are more stitches
off screen in that direction.
Press “Review Memory Left” key (or “Review Memory
Right” key) to move cursor and preview the entire
sequence.
q
Editing
How to Delete Stitches
The location of the cursor determines which stitch
will be deleted.
z Press “Review Memory Left” key or “Review
Memory Right” key to move cursor under stitch
094.
z
x
c
x Press “C” key to delete the heart.
How to Add Stitches
The location of the cursor determines where the
new stitch will be added. Cursor should be under
stitch 523.
c Select 001. Press “ENTER” key to add the
stitch 001 between stitch 519 and 523. Move the
cursor under the stitch 001, then press “ENTER”
key.
v
v Select 091. Press “ENTER” key.
NOTE: It is possible to edit after sewing out a
sequence. Before selecting new stitch, press one of
the “Review Memory” keys to have blinking cursor
appear.