74
Rolled Hem
An easy, professional way to sew hems. The spiral
on the hemmer foot guides the fabric edge to
create a rolled hem. Recommended for fine, sheer
fabrics used in bridal wear.
Attach hemmer foot D.
Tr im about 6.5 mm (1/4˝) from corners to reduce
bulk.
Make a double 3 mm (1/8˝) fold approximately 8
cm (3˝) in length.
Align fabric hem edge with the inside of right
extension of foot q. Use this placement on foot as
guide. Lower presser foot. Sew 3 or 4 stitches while
holding needle and bobbin threads. Stop sewing.
Lower needle into fabric and raise presser foot.
Insert folded portion of fabric into spiral of foot w.
Lower presser foot and sew; lift up edge of fabric
to keep it feeding smoothly.
NOTE: Use zigzag with stitch width 1.0 – 2.0 for
variation.
w
q
To Next Page
Loading...
