Eltek BC2000 User Manual

14 Display Operation Manual BC2000 and JC2000 Controller ~ Doc. No. 2055882, Issue 5.1, June 2014
Controller Settings
The controller is configured with default settings based on the profile number. No
additional setup is required. Default parameter values are listed in Table 5 (page
36). These values represent the default profile (“Profile 01”). Actual profile numbers
vary depending on customer specifications. See the section “Profile and Preset” on
page 16 to determine the controller’s profile number.
If the number is different from the default profile (01), then contact Eltek technical
support at 1-800-435-4872 for a copy of the settings specified by that profile
number.

Eltek BC2000 Specifications

General

Brand	Eltek
Model	BC2000
Category	Controller
Language	English