Display Operation Manual BC2000 and JC2000 Controller ~ Doc. No. 2055882, Issue 5.1, June 2014 25
Change Screen Saver Settings
The timeout period can be adjusted between 1 and 60 minutes as follows:
Main Menu ► Display ► Timeout ► Edit
The screen saver can be changed as follows:
Main Menu ► Display ► Screen Saver ► Edit
Ringers
If ring generators are installed in the system, the following parameters can be
adjusted:
• AC Voltage—AC output voltage
• DC Voltage—DC value at which the ringer RMS value is offset. It should be
equal to the float voltage.
• Frequency—ring frequency
• Select—priority of ring generator module:
None—Disables ring generator
Ringer A—Makes the ring generator the main ringer module
Ringer B—Makes the ring generator the backup ringer module
Other information available on this page:
• Status—ring generator activity status code
• Runtime—total ring generator runtime
• Version—ring generator software version
• Model—module model number
• Serial—module serial number
The ring generator menu is accessed as follows:
Main Menu ► Modules ► Ringers (if installed)
To Next Page
Loading...
Need help?
General
