Eltek BC2000 User Manual

48 Display Operation Manual BC2000 and JC2000 Controller ~ Doc. No. 2055882, Issue 5.1, June 2014
Activate
Executables:
• Manual BDT: Must enable BDT under BATTERY MGT menu; see “Battery
Discharge Test” on page 26.
• Manual Boost: Must enable BOOST under BATTERY MGT menu; see “Boost
Mode” on page 27.
• Lamptest: Illuminates all LEDs (controller and rectifiers)
Configurable parameters:
• Relays – Controller output relays
Test Mode: Disabled/Enabled
Relay (A – F): Inactive/Active
MANUAL BDT*
MANUAL BDT*
MANUAL BOOST*
MANUAL BOOST*
RELAYS
RELAYS
LAMPTEST
ACTIVATE
EXECUTE?
EXECUTE?
MANUAL BDT
MANUAL BOOST
SYSTEM
SYSTEM
MAIN
MENU
ALARMING
ALARMING
BATTERY MGT
BATTERY MGT
GENERATOR
GENERATOR
THERMAL
THERMAL
PROBES
PROBES
NETWORK
NETWORK
DISPLAY
DISPLAY
VERSION
VERSION
PRESETS
PRESETS
LOGOUT
LOGOUT
MODULES
MODULES
ACTIVATE
ACTIVATE
*Only appears if
enabled under
BATTERY MGT menu
(STATE parameter)
TEST MODE
RELAY A
RELAY B
RELAY C
RELAYS
RELAY D
RELAY E
RELAY F

Eltek BC2000 Specifications

General

Brand	Eltek
Model	BC2000
Category	Controller
Language	English