18 Display Operation Manual BC2000 and JC2000 Controller ~ Doc. No. 2055882, Issue 5.1, June 2014
Figure 13 – Screen Saver
To clear the screen saver, push either the right or left button once or turn the scroll
knob one click in either direction.
NOTE: The timeout feature overrides all status notices, including alarms and
temperature compensation. The alarm LED (“ALM”) on the controller faceplate
indicates alarm conditions even if the screen saver is active. Clear the screen saver
to restore the home screen and view status and alarm notices.
To change the screen saver and timeout period, see the section “Change Screen
Saver Settings” on page 25.
Main Menu
To access the Main Menu from the home screen press the right (►) button. The
following submenus are found in the main menu:
• Login (only appears when no user is logged in)
• System
• Alarming
• Modules
• Activate
• Battery Mgt
• Generator
• Thermal
• Probes
• Network
• Display
• Version
54.00V
100A
Screen Saver
System Voltage
Total Rectifier Current
To Next Page
Loading...