2 The Smartpack2 Master Controller
10 User's Guide Smartpack2 Master Controller 350020.013, Issue 2.0, 2014 Jan
Software Menus
The Smartpack2-based system’s functionality is accessed via a network of software menus
and submenus, enabling you to configure and control the whole power system from the
controller’s front panel. When browsing the menus, the Menu Level Indicator shows the
menu level you are in. Editing parameters is password protected, (default pin code <0003>
may be changed for security reasons). The display can be in Status Mode or in Menu Mode.
From a PC’s web browser, or running the PowerSuite program, you can also access the
complete system functionality, described in the programs’ Help and in Online Help.
System Parameters
Display more with the → and ← arrow keys.
(Display area P)
System Status
Normal mode, Alarm mode, etc.
(Display area S)
System Messages
Animated icons, keys to press, alarms,
system time, etc
(Multi-Info field, Display area M)
Status Battery Bank
Displayed in % or in Ah
(Display area B)
Main Menu Options (Level 1)
Menu Level Indicator
hierarchical menus (Level 1)
Submenu “System Status” (Level 2)
Submenu “System Configuration” (Level 2)
Menu Level Indicator
hierarchical menus (Level 2)
Chosen option (yellow text)
Press “Enter” to display the
Mains submenu
Example Submenu “Monitors Statistics” (Level 3)
Menu Level Indicator
hierarchical menus (Level 3)
Pin Code required for changing configured parameters
(use the ↑ or ↓ arrow keys to enter code).
Default pin code <0003> (should be changed for security reasons)
To change from Status Mode
to Menu Mode press on this
key:
Animated System Messages (M)
in Normal Mode
When no battery bank installed, the
icons are shown in Display area B
To Next Page
Loading...