2 The Smartpack2 Master Controller
6 User's Guide Smartpack2 Master Controller 350020.013, Issue 2.0, 2014 Jan
2. The Smartpack2 Master Controller
The Smartpack2 Master controllers are powerful modules used as master controllers in the
distributed control system of Smartpack2-based power supply systems. They serve as the
local user interface between you and the power system.
The Smartpack2 Master controller is 2U high and 160mm wide, and it is mounted in the
power system’s front panel or door. The CAN bus is the only connection between the
Smartpack2 Master and the Smartpack2 Basic controller, which provides great installation
flexibility.
Key Features
A wide range of features are implemented in the Smartpack2 Master controller, as
mentioned below:
Graphical TFT high contrast, high resolution color display for easy navigation
LEDs for local visual alarming (Major, Minor, Power ON)
Ethernet for remote or local monitoring and control via WEB Browser
Ethernet port for straight-through and crossover cables
SNMP protocol with TRAP, SET and GET on Ethernet. Email of TRAP alarms
Comprehensive logging
Automatic battery monitoring and test
Battery lifetime indication
Battery used and remaining capacity (Ah or %) monitoring
User defined alarm grouping (Boolean logic for grouped alarms)
Uploading and downloading of firmware and configuration files with SD card
SD card slot for downloading/uploading of logs and setup
Comprehensive generator/hybrid/DC solar system control and monitoring features
Read also chapter “Technical Specifications”, page 12, for more details.
To Next Page
Loading...
Need help?
General
