Eltek Smartpack2 - Firmware Upgrade from a Computer

2 The Smartpack2 Master Controller
14 User's Guide Smartpack2 Master Controller 350020.013, Issue 2.0, 2014 Jan
Firmware Upgrade from a Computer
The Smartpack2 Master controller can be upgraded using a personal computer to run the
“Eltek Network Utility” program (ENU), to transfer the firmware file to the controller.
Do following:
 Open the controller
using your fingers or a pen, see steps (1), (2) in the figure on page 13 or chapter
“Opening and Closing Smartpack2 Master Controller”, on page 7
 Connect a PC to the Smartpack2 Master controller
plugging one end of a standard Ethernet cable to the PC and the other end to the
controller’s Ehternet port
 Start the “Eltek Network Utility” program, in the PC
 Select the Smartpack2 Master controller;
using the ENU program, check correct MAC and IP address
and the correct firmware file <SP2MAST_xx.xx.APP.s19>
 Click on the “Update Software” button
in the ENU program
For detailed functionality description, browse and search through the Functionality
Description topic in the PowerSuite programs’ Help and in Online Help.
Overview LAN Devices and Firmware Files (PC - S19 Format)
The “Eltek Network Utility” program (ENU) will transfer the specific firmware file (s19-
format) from a LAN connected computer to the device (or hardware platform).
LAN Device
File Name (examples)
File Type
Smartpack S
Smartpack-S_(part #)_(version #)_APP.s19
Firmware upgrade Controller &
embedded Web Adapter
Smartpack2 Master
SmartPack2_Master_405006.009_1.3_APP.s19
Firmware upgrade Controller &
embedded Web Adapter
Compack
ComPack_xx.xx_APP.s19
Firmware upgrade Controller &
embedded Web Adapter
Smartpack
(Part 242100.113)
Rev4.2_SB70Webpower_APP.s19
Firmware upgrade embedded
Web Adapter
Smartpack
(Part 242100.118, HW v2)
Webpower_MCF5208_43_APP.s19
Firmware upgrade embedded
Web Adapter
Smartpack
(Part 242100.118, HW v3)
Webpower_MCF5235_43_APP.s19
Firmware upgrade embedded
Web Adapter
WebPower Adapter SB72
Rev4.2_SB72Webpower_APP.s19
Firmware upgrade Web Adapter
(stand-alone with Smartpack)
WebPower Adapter SB72
Rev2.0_SB72Webpower_APP.s19
Firmware upgrade Web Adapter
(stand-alone with Aeon Gold)
WebPower Adapter SB72-512
Webpower_SB72-512_20_APP.s19
Firmware upgrade Web Adapter
(stand-alone with Aeon Gold)
WebPower Adapter SB72
Rev2.0_SB72Webpower_APP.s19
Firmware upgrade Web Adapter
(stand-alone with MCU)
WebPower Adapter SB72-512
Webpower_SB72-512_20_APP.s19
Firmware upgrade Web Adapter
(stand-alone with MCU)
The “xx.xx” refers to the firmware file’s version number.