ELTEX MES1000 User Manual

MES1000, MES2000 Ethernet Switches 107
SD—system description
SC—system capabilities
Address
Device address being send in LLDP messages.
Notifications
Define whether LLDP notifications are enabled or disabled.
Show information on neighbouring devices:
console# show lldp neighbors
System capability legend:
B - Bridge; R - Router; W - Wlan Access Point; T - telephone;
D - DOCSIS Cable Device; H - Host; r - Repeater;
TP - Two Ports MAC Relay; S - S-VLAN; C - C-VLAN; O - Other
Port Device ID Port ID System Name Capabilities TTL
--------- ----------------- ----------------- ----------------- ------------ -----
gi1/0/1 a8:f9:4b:84:02:c0 gi1/0/9 ts-7800-2 O 117
gi1/0/2 a8:f9:4b:81:61:40 gi1/0/14 ts-7800-1 B 94
gi1/0/3 a8:f9:4b:91:66:66 gi1/0/15 ts-7900-2 B 113
gi1/0/4 a8:f9:4b:81:71:48 gi1/0/16 ts-7900-1 B 94
console# show lldp neighbors gigabitethernet 1/0/1
Device ID: a8:f9:4b:84:02:c0
Port ID: gi1/0/9
Capabilities: Other
System Name: ts-7800-2
System description: MES-3124 28-port 1G/10G Stackable Managed Switch
Port description: gigabitethernet1/0/9
Time To Live: 92
802.1 PVID: None
802.1 PPVID:
802.1 VLAN:
802.1 Protocol:
Table 5.103—Description of results
Field
Description
Port
Port number.
Device ID
Name or MAC address of the neighbouring device.
Port ID
Neighbouring device port identifier.
System name
Device system name.
Capabilities
This field describes the device type:
B—Bridge
R—Router
W—WLAN Access Point
T—Telephone
D—DOCSIS cable device
H—Host
r—Repeater
O—Other.
System description
Neighbouring device description.
Port description
Neighbouring device port description.
Management address
Device management address.
Auto-negotiation
support
Define, if the automatic port mode identification is supported.
Auto-negotiation status
Define, if the automatic port mode identification support is enabled.

ELTEX MES1000 Specifications

General

Brand	ELTEX
Model	MES1000
Category	Switch
Language	English