ELTEX MES1000 User Manual

MES1000, MES2000 Ethernet Switches 117
port-channel group}]
no bridge multicast ipv6 ip-
address
ip_multicast_address
Remove multicast IP address from the table.
bridge multicast ipv6
forbidden ip-address
ipv6_multicast_address
{add | remove}
{ gigabitethernet gi_port |
fastethernet fa_port |
port-channel group}
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
group: (1..8)
Disable the connection for configured port(s) to multicast IPv6
address.
- ipv6_multicast_address—multicast IP address
- add—add port(s) into the banned list
- remove—remove port(s) from the banned list
Interface listing should be delimited with '–' and ','.
no bridge multicast ipv6
forbidden ip-address
ipv6_multicast_address
Restore the default value.
bridge multicast ipv6
source ipv6_address group
ipv6_multicast_address
[[add | remove]
{gigabitethernet gi_port |
fastethernet fa_port |
port-channel group}]
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
group: (1..8)
Set the match between the user IPv6 address and multicast
address in the multicast addressing table and statically
add/remove interfaces to/from the group.
- ipv6_address—source IP address
- ipv6_multicast_address—multicast IP address
- add—add ports to the source IP address group
- remove—remove ports from the source IP address group
no bridge multicast ipv6
source ipv6_address group
ipv6_multicast_address
Restore the default value.
bridge multicast ipv6
forbidden source
ipv6_address group
ipv6_multicast_address
{add | remove}
{ gigabitethernet gi_port |
fastethernet fa_port |
port-channel group}
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
group: (1..8)
Disable adding/removal of matches between the user IPv6
address and the multicast address in the multicast addressing
table for the specific port.
- ipv6_address—source IPv6 address
- ipv6_multicast_address—multicast IPv6 address
- add—disable port adding to the source IPv6 address group
- remove—disable port removal from the source IPv6 address
group
no bridge multicast ipv6
forbidden source
ipv6_address group
ipv6_multicast_address
Restore the default value.
Ethernet interface configuration mode commands (interface range), port group interface
Command line request in Ethernet interface, port group interface configuration mode appears as
follows:
console# configure
console(config)# interface {ethernet port|port-channel group}
console(config-if)#
Table 5.116 —Ethernet interface configuration mode commands, interface group
Command
Value/Default value
Description
bridge multicast
unregistered
{forwarding | filtering}
-/forwarding
Set the forwarding rule for packets received from unregistered
multicast addresses.
- forwarding—forward unregistered multicast packets
- filtering—filter unregistered multicast packets
no bridge multicast
unregistered
Restore the default value.
Global configuration mode commands
Command line request in global configuration mode appears as follows:
console(config)#

ELTEX MES1000 Specifications

General

Brand	ELTEX
Model	MES1000
Category	Switch
Language	English