ELTEX MES1000 User Manual

MES1000, MES2000 Ethernet Switches 123
multicast-tv vlan
Multicast VLAN and multicast traffic to client VLAN for the
interface in 'access' mode.
switchport trunk multicast-
tv vlan vlan_id [tagged]
vlan_id: (1-4094)
Enable forwarding of IGMP queries from VLAN, that the port
belongs to, to Multicast VLAN for the interface in 'trunk'
mode.
Multicast traffic can be forwarded to the port as untagged or
tagged depending on the tagged parameter value.
tagged parameter defines, whether the multicast traffic
should be forwarded to the port as tagged.
no switchport trunk
multicast-tv vlan
Disable forwarding of IGMP queries to Multicast Vlan and
multicast traffic to the port.
switchport general
multicast-tv vlan vlan_id
[tagged]
vlan_id: (1-4094)
Enable forwarding of IGMP queries from VLAN, that the port
belongs to, to Multicast VLAN for the interface in 'general'
mode.
Multicast traffic can be forwarded to the port as untagged or
tagged depending on the tagged parameter value.
tagged parameter defines, whether the multicast traffic
should be forwarded to the port as tagged.
no switchport general
multicast-tv vlan
Disable forwarding of IGMP queries to Multicast Vlan and
multicast traffic to the port.
EXEC mode commands
All commands are available to the privileged user only.
Command line request in EXEC mode appears as follows:
console#
Table 5.123 —EXEC mode commands
Command
Action
show ip igmp snooping
mrouter [interface vlan_id]
Show information on learnt multicast routers in the selected VLAN group.
show ip igmp snooping
interface vlan_id
Show IGMP-snooping information for the current interface.
show ip igmp snooping
groups [vlan vlan_id]
[ip-multicast-address
ip_multicast_address]
[ip-address ip_address]
Show information on learnt multicast groups.
show ip igmp snooping
multicast-tv [vlan vlan_id]
Show the IP addresses associated with television VLAN.
show ip igmp snooping cpe
vlans
[vlan vlan_id]
Show table of matches for subscriber VLAN equipment and TV VLAN.
Example execution of commands
Enable ISMP snooping on the switch. Enable automatic port identification with connected multicast
routers for VLAN 6. Set the IGMP query interval—100 seconds. Increase the robustness value to 4.
Set the maximum query response time—15 seconds.
console# configure
console (config)# ip igmp snooping
console (config-if)# ip igmp snooping vlan 6 mrouter learn pim-dvmrp
console (config)# interface vlan 6
console (config-if)# ip igmp snooping query-interval 100
console (config-if)# ip igmp robustness 4
console (config-if)# ip igmp query-max-response-time 15

ELTEX MES1000 Specifications

General

Brand	ELTEX
Model	MES1000
Category	Switch
Language	English