ELTEX MES1000 User Manual

170 MES1000, MES2000 Ethernet Switches
Consumed Power
Measured power consumption value
Usage Threshold
Power consumption threshold, that will form the informational message (snmp-trap) once
exceeded
Traps
Show, if the informational message generation is enabled
Port
Switch interface designation
Powered device
PoE device description
State
Port power supply administrative state. Possible values—'auto' and 'never'.
Priority
Power supply management priority. Possible values—'critical', 'high', 'low'.
Status
Port power supply operating state. Possible values:
Off—port power supply is disabled by the administrator
Searching—port power supply is enabled, waiting for PoE device connection
On—port power supply is enabled, PoE device is connected
Fault—faulty port power supply The power requested by PoE device exceeds the available
capacity, or the power consumed by PoE device has exceeded the specified limit.
Classification
Classification of the connected device according to IEEE 802.3af, IEEE 802.3at standards
Overload Counter
Power overload event counter
Short Counter
Short circuit event counter
Denied Counter
Power supply denied event counter
Absent Counter
Powered device absence event counter
Invalid Signature
Counter
Connected PoE device classification error counter

ELTEX MES1000 Specifications

General

Brand	ELTEX
Model	MES1000
Category	Switch
Language	English