MES1000, MES2000 Ethernet Switches 169
Privileged EXEC mode commands
Command line request in Privileged EXEC mode appears as follows:
console#
Table 5.195 —Privileged EXEC mode commands
Example execution of commands
Show the power supply state for all the device interfaces
console# show power inline
Port based power-limit mode
Unit Power Nominal Consumed Usage Traps Temp (C)
Power Power Threshold
---- ------- ------- ------- ------ -------- --------
1 On 300 Watts 50 Watts (17%) 95 Disable 0
2 Off 1 Watts 0 Watts (0%) 95 Disable 0
3 Off 1 Watts 0 Watts (0%) 95 Disable 0
4 Off 1 Watts 0 Watts (0%) 95 Disable 0
Port Powered Device State Status Priority Class
----- -------------- ----------- -------- -------- -------
gi1/0/1 IP Phone Model A Auto On High Class0
gi1/0/2 Wireless AP Model A Auto On Low Class1
gi1/0/3 Auto Off Low N/A
...
Show the power supply state for the selected interface
console# show power inline gi1/0/1
Port Powered Device State Status Priority Class
----- -------------- ------- ------ -------- -------
gi1/0/1 IP Phone Model A Auto On High Class0
Time range:
Power limit (for port power-limit mode): 30W
Port Status: Port is on - valid capacitor/resistor detected
Overload Counter: 0
Short Counter: 0
Denied Counter: 0
Absent Counter: 0
Invalid Signature Counter: 0
Description of the displayed power supply parameters is listed in the table.
Table 5.196—Power supply status parameters.