ELTEX MES1000 User Manual

MES1000, MES2000 Ethernet Switches 59
clock summer-time zone
date month date year hh:mm
date month year hh:mm
[offset]
zone: (1..4) characters/
no zone description
week: (1..4, first, last);
day: (mon..sun);
date:( 1..31);
month: (Jan..Dec);
year: (2000 ..2097);
hh: (0..23), mm: (0..59);
offset: (1..1440)/60 min;
The daylight saving
change is disabled by
default.
Define date and time for automatic daylight saving change and
the set back process (for the specific year).
Zone description should be specified first, time for daylight
saving—second, and the set back time—third.
- zone—abbreviation of the phrase (zone description)
- date—date
- month—month
- year—year
- hh—hours, mm—minutes
- offset—quantity of minutes added during the daylight saving
change
clock summer-time zone
recurring {usa|eu|
{week day month hh:mm
week day month hh:mm}}
[offset]
Define date and time for automatic daylight saving change and
the set back process for each year.
- zone—abbreviation of the phrase (zone description)
- usa—set the daylight saving rules, used in US (daylight saving
on the second Sunday of March, set back on the first Sunday
of November, at 2am local time)
- eu—set the daylight saving rules, used in EU (daylight saving
on the last Sunday of March, set back on the last Sunday of
October, at 1am GMT)
- hh—hours, mm—minutes
- week—week of the month
- day—day of the week
- month—month
- offset—quantity of minutes added during the daylight saving
change
no clock summer-time
Disable daylight saving change
sntp authentication-key
number
md5 value
number
(1..4294967295);
value (1..8) characters
By default,
authentication is disabled
Specify authentication key for SNTP protocol.
- number—key number
- value—key value
no sntp authentication-key
number
Delete authentication key for SNTP protocol.
sntp authenticate
-/authentication is not
required
Enable mandatory authentication for getting information from
NTP servers.
no sntp authenticate
Restore the default value.
sntp trusted-key key-number
key-number
(1..4294967295);
By default,
authentication is disabled
Perform synchronization system authentication with SNTP by
the specified key.
- key-number—key number
no sntp trusted-key key-
number
Restore the default value.
sntp client poll timer seconds
seconds (60 .. 86400)
/1024
Set polling time for SNTP client.
no sntp client poll timer
Restore the default value.
sntp broadcast client enable
-/denied
Allow multicast SNTP client operation.
no sntp broadcast client
enable
Restore the default value.
sntp anycast client enable
-/denied
Allow the operation of SNTP clients, that support packet
transmission to the nearest device in a group of receivers.
no sntp anycast client enable
Restore the default value.
sntp client enable
{ gigabitethernet gi_port |
fastethernet fa_port | port-
channel group|
vlan vlan_id}
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
group: (1..8);
vlan_id (1..4094)
/denied
Allow the operation of SNTP clients, that support packet
transmission to the nearest device in a group of receivers, and
to broadcast SNTP clients for the selected interface.
- for detailed interface configuration, see Interface
Configuration Section.
no sntp client enable
{ gigabitethernet gi_port |
fastethernet fa_port | port-
channel group|
vlan vlan_id}
Restore the default value.
sntp unicast client enable
-/denied
Allow unicast SNTP client operation.
no sntp unicast client enable
Restore the default value.
sntp unicast client poll
-/denied
Allow sequential polling of the selected unicast SNTP servers.
no sntp unicast client poll
Restore the default value.

ELTEX MES1000 Specifications

General

Brand	ELTEX
Model	MES1000
Category	Switch
Language	English