EM TEST VDS 200 Series User Manual

EM TEST VDS 200 Series
Manual for Operation V 5.19 39 / 57
5.6.
Test routines
Arbitrary Wave Generator
Standards
ISO 7637
F1: Pulse 4
F2: Pulse 2b
ISO 16750-2 WD 03/2000-2
F1: Short voltage drop
F2: Slow decrease / increase
F3: Supply voltage profile
F4: Pulse ’Starting profile’
F5: Sweep
F6: Overvoltage Vmax
JASO
F1: Jaso
Functions
F1 : Sinus
F2 : Jumpstart
F3 : VDS Extern
F4 : Pulse 4 (GM 9105P)
DC Power Supply
Using as a dc power supply
Service
Addresses EM TEST AG
Selftest
set-up routines
5.7.
Measurement
BNC connector CRO TRIGGER
trigger for oscilloscope
positive ramp to +15V
5.8.
Special models
Special models have the index VDS200N nn.X . The difference to the standard models are the voltage and
current ranges. The maximum overcurrent trips at the rated current. ( see Chapter 1)
=> Not relevant data for the standards can be changed by the manufacturer <=

EM TEST VDS 200 Series Specifications

General

Brand	EM TEST
Model	VDS 200 Series
Category	Amplifier
Language	English