EM TEST VDS 200 Series User Manual

EM TEST VDS 200 Series
Manual for Operation V 5.19 49 / 57
8.
Appendix
8.1.
Declaration of CE-Conformity
Manufacturer :
EM TEST Switzerland GmbH
Address:
Sternenhofstr. 15
CH 4153 Reinach
Switzerland
declares, that under is sole responsibility, the product’s listed below, including all their options, are conformity with the
applicable CE directives listed below using the relevant section of the following EC standards and other normative
documents.
Product‘s name:
Voltage Drop Generator
Model Number(s)
VDS200N10, VDS200N15, VDS200N30, VDS 200N50,
VDS 200N100, VDS 200N100.2, VDS 200N100.3, VDS 200N100.4, VDS 200N100.6
VDS200N150, VDS200N200, VDS 200N200.1, VDS 200N200.3, VDS 200N200.4
VDS 200N30.1, VDS200N50.1
RDS 200N
Low Voltage Directive 2006/95/EC
Standard to which conformity is declared:
EN 61010-1 : 2006
Safety requirements for electrical equipment for measurement, control, and
laboratory use.
EMC Directive 2004/108/EG
Standard(s) to which conformity is declared:
EN 61326 : 2006
Electrical equipment for measurement, control and laboratory use Class A
EN 61000-3-2 : 2007
Limits for harmonic current emissions
EN 61000-3-3 : 2005
Limitation of voltage changes, voltage fluctuations and flicker in public low-
voltage supply systems.
European representative
Manufacturer
EM TEST GmbH
EM TEST AG
Lünenerstr. 211
Sternenhofstr. 15
D 59174 Kamen
CH 4153 Reinach
Tel: +49 (0) 2307 / 26070-0
Tel: +41 61-7179191
Fax: +49 (0)2307 / 17050
Fax: +41 61-7179199
By
U. Flor
General manager
A. Burger
Design and Research
Place
Kamen, Germany
Reinach BL , Switzerland
Date
12. December 2011
12. December 2011

EM TEST VDS 200 Series Specifications

General

Brand	EM TEST
Model	VDS 200 Series
Category	Amplifier
Language	English