EMBRON Hatteland E Series - Secure Boot; Choose Boot Device

101
Additional features overview/details
Appendix
IND100077-219
Secure Boot
Secure Boot is a security feature that can protect the system from running unauthorized boot loaders and avoid
loading non-signed drivers during boot process. The feature is only supported for boot devices in UEFI mode.
CSM Support (BIOS Legacy boot and Option ROM support) is not compatible with this security feature and must be
disabled in BIOS before enabling Secure Boot.
Basic Procedure:
-Set UEFI boot type in BIOS (set by default)
- Enter BIOS by pressing Del key during boot.
- Navigate to Boot tab in BIOS
- Make sure Boot mode select is set to: UEFI Boot Type
- Press F4 to save and Exit
- Disable CSM Support
- Enter BIOS by pressing Del key during boot.
- Go to Advanced tab and Select “CSM Conguration”.
- Set CSM Support to Disabled
- Press F4 to save and exit (unit must be restarted before continuing)
- Enable Secure Boot
- Enter BIOS by pressing Del key during boot.
- Go to Security tab and Select “Secure Boot”.
- Set Attempt Secure Boot to Enabled
- Secure Boot Mode is set to standard as default.
- Customized option will enable Key Management menu below with advanced settings.
- Press F4 to save and exit
Choose Boot Device
By factory default, press F7 to choose boot device at startup of unit.