EMBRON Hatteland E Series - Flush Mounting 27.0 Inch

Technical Drawings - HD CMB SE1-B1
84
IND100132-449
This document is the property of Hatteland Technology AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Technology AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Technology AS Proprietary information. Not to be distributed to any third party without written permission.
Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG file.
Flush Mounting 27.0 inch
651,00 25,63 629,00 24,76 11,00
0,43
4x R 2,00
0,08
4x R 3,00
0,12
416,00 16,38
438,00 17,24
11,00 0,43
AA
Console thickness
220,00 8,66
16,00 0,63
2x R 4,00
0,16
10,00 0,39
Max thickness for mounting the bracket
16,00 0,63
Sunken face for Display
Console thickness
A-A (2 : 1)
BACK VIEW
SIDE VIEW
FRONT VIEW
FLUSH MOUNTING DETAILS - PANEL CUTOUT
Applies for all 27 inch Displays and Panel Computers
H
1
2
G
F
E
3
4
5
6
D
C
B
A
1
2
3
4
5
6
7
8
7
8
G
F
E
9
10
D
C
B
11
12
A
9
10
11
12
H
Hatteland Technology AS
Eikeskogvegen 52
N-5570 Aksdal
P025457
Projection:
This document is the property of Hatteland Technology AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Technology AS. Any authorized reproduction, in whole or in part, must include this legend.
01
Revision:
Approved by:
Drawing number:
A1
1:3
Scale:
Last rev. date / by: / Creation date / by: /
KD
14.08.19
ISO 2768-mK
Tolerance
Units: mm [inches]