EMBRON Hatteland E Series - Power Mode; COM Config

99
Appendix
IND100077-164
Power Mode / COM Cong
Power Mode
Power mode is congurable under BIOS setup menu.
Advanced -> SCOM BUS Conguration -> Power Mode
• Always On (AT Mode)
(Computer will start when external power is applied, valid in next power-recycle)
• Power Button Only (ATX Mode)
(Computer will only start when power button is pressed, valid in next power-recycle)
• Previous State
(Computer will start when power button is pressed or if it was running before power was lost, valid in
next power-recycle)