EMBRON Hatteland E Series - Flush Mounting 21.5 Inch

Technical Drawings - HD CMB SE1-B1
78
IND100132-447
This document is the property of Hatteland Technology AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Technology AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Technology AS Proprietary information. Not to be distributed to any third party without written permission.
Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG file.
Flush Mounting 21.5 inch
537,00 21,14 516,00 20,31 10,50
0,41
338,50 13,33
359,50 14,15
10,50 0,41
AA
Console thickness
220,00 8,66
16,00 0,63
2x R 4,00
0,16
16,00 0,63
Sunken face for Display
10,00 0,39
Max thickness for mounting the bracket
Console thickness
A-A (2 : 1)
FRONT VIEW
SIDE VIEW BACK VIEW
FLUSH MOUNTING DETAILS - PANEL CUTOUT
Applies for all 21 inch Displays and Panel Computers
H
1
2
G
F
E
3
4
5
6
D
C
B
A
1
2
3
4
5
6
7
8
7
8
G
F
E
9
10
D
C
B
11
12
A
9
10
11
12
H
Hatteland Technology AS
Eikeskogvegen 52
N-5570 Aksdal
P025467
Projection:
This document is the property of Hatteland Technology AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Technology AS. Any authorized reproduction, in whole or in part, must include this legend.
01
Revision:
Approved by:
Drawing number:
A1
1:3
Scale:
Last rev. date / by: / Creation date / by: /
KD
16.08.19
ISO 2768-mK
Tolerance
Units: mm [inches]