43
Operation
User Controls
IND100064-68
Buzzer:
To take advantage of the buzzer, please review the SCOM (Serial/Ethernet Communication) manual located here:
https://www.hattelandtechnology.com/hubfs/pdfget/inb100018-7.htm (reference: “BZZ” - Buzzer Control command,
through the Internal COM4 port).
Touching this area will naturally mute buzzer sound or in some cases make it lower or change audible frequency. In no
circumstances should this area be blocked by either stickers or objects!
Light Sensor:
Located next to the ECDIS (Globe) symbol. The Light Sensor is used to sense level of ambient light in the surrounding
environment. The sensor data can be read by suitable software through the Hatteland Technology SCOM functionality
of the unit and thus can be used to control brightness remotely. Touching or covering this area will naturally make the
sensor data inaccurate and should be avoided!
Hatteland Technology’s Serial Remote Control Interface (SCOM) protocol document can be downloaded from:
https://www.hattelandtechnology.com/hubfs/pdfget/inb100018-7.htm
To Next Page
Loading...
