EMC VNX Series Parts Location Guide

18 EMC VNX7500 Parts Location Guide
Data Mover enclosure
Data Mover enclosure
Figure 14 shows the front view of the Data Mover enclosure.
Front view
Figure 14 Data Mover enclosure (front view)
Table 9 provides the part number label location, part number, description, and whether it
is a FRU or CRU.
AC
AC
AC
AC
2
CNS-001723
1
Table 9 Data Mover enclosure front view part numbers
Part number label
location
(Figure 14) Part number Description FRU CRU
1 071-000-543
1
Data Mover enclosure 400 W, 2U,
single 12 V output power
supply/cooling fan module (for a
closer view, see Figure 15 on
page 19)

2 110-113-724B Data Mover 2.8-GHz CPU module
with 24 GB of memory (for a closer
view, see Figure 17 on page 20)
303-113-700B Data Mover 2.8-GHz CPU module
without memory (for a closer view,
see Figure 17 on page 20)

1. The part number label on the power supply/cooling fan module is located on the lower half of the pull
handle.

EMC VNX Series Specifications

General

Management Interface	Unisphere
Drive Support	SAS, NL-SAS, Flash (SSD)
RAID Levels	RAID 0, 1, 3, 5, 6
Protocols Supported	Fibre Channel, iSCSI, NFS, CIFS
Data Services	Deduplication, Compression, Snapshots, Replication
Processor	Intel Xeon
Operating System	VNX Operating Environment (block), VNX File Operating Environment (file)