EMC VNX Series Parts Location Guide

12 EMC VNX7500 Parts Location Guide
Storage processor enclosure (SPE)
Table 3 provides the part number label location, part number, description, and whether it
is a FRU or CRU.
SP Power supply/cooling fan module
Figure 8 shows the front view of two power supply/cooling fan modules used in the
storage processor enclosure.
Note: The part number label is located on the lower half of the pull handle.
Figure 8 Example of a power supply module/cooling fan (front view)
Table 3 SPE front view part numbers
Part number label
location (Figure 7
on page 11) Part number Description FRU CRU
1 071-000-543
1
SP 400 W, 2U, single 12 V output
power supply/cooling fan module
(for a closer view, see Figure 8)

2 110-113-724B Base SP 2.8-GHz CPU module with
24 GB of memory (for a closer view,
see Figure 10 on page 14)
110-113-748B Optional SP 2.8-GHz CPU module
with 48 GB of memory (for a closer
view, see Figure 10 on page 14)
303-113-700B SP 2.8-GHz CPU module without
memory (for a closer view, see
Figure 10 on page 14)

1. The part number label on the power supply/cooling fan module is located on the lower half of the pull
handle.
AC
AC
Part Number (P/N) label
CNS-001682

EMC VNX Series Specifications

General

Management Interface	Unisphere
Drive Support	SAS, NL-SAS, Flash (SSD)
RAID Levels	RAID 0, 1, 3, 5, 6
Protocols Supported	Fibre Channel, iSCSI, NFS, CIFS
Data Services	Deduplication, Compression, Snapshots, Replication
Processor	Intel Xeon
Operating System	VNX Operating Environment (block), VNX File Operating Environment (file)