EMC VNX Series Parts Location Guide

16 EMC VNX7500 Parts Location Guide
Storage processor enclosure (SPE)
Management module
Figure 12 shows the part number label location on the rear view of the SP enclosure
management module used in the SP enclosure.
Figure 12 Example of the SP enclosure management module
Note: Figure 12 shows an example of the SP management module without a USB port.
Table 7 shows the part number label location, part number, description, and whether it is
a FRU or CRU.
Part number (P/N) label
VNX-000619
Table 7 SP enclosure management module part number
Part number label
location
(Figure 12) Part number Description FRU CRU
303-129-101B
1
303-129-100B
2
Management module 
1. This part number is for a management module that includes a USB port.
2. This part number is for a management module that does not include a USB port.

EMC VNX Series Specifications

General

Management Interface	Unisphere
Drive Support	SAS, NL-SAS, Flash (SSD)
RAID Levels	RAID 0, 1, 3, 5, 6
Protocols Supported	Fibre Channel, iSCSI, NFS, CIFS
Data Services	Deduplication, Compression, Snapshots, Replication
Processor	Intel Xeon
Operating System	VNX Operating Environment (block), VNX File Operating Environment (file)