EMC VNX Series Parts Location Guide

Data Mover enclosure
EMC VNX7500 Parts Location Guide 19
Data Mover Power supply/cooling fan module
Figure 15 shows the front view of two power supply/cooling fan modules used in the Data
Mover enclosure.
Note: The part number label is located on the lower half of the pull handle.
Figure 15 Example of a power supply module/cooling fan (front view)
Table 10 shows the part number label location, part number, description, and whether it
is a FRU or CRU.
AC
AC
Part Number (P/N) label
CNS-001682
Table 10 Power supply module/cooling fan part number
Part number label
location
(Figure 15) Part number Description FRU CRU
071-000-543 Data Mover enclosure 400 W, 2U,
single 12 V output power
supply/cooling fan module


EMC VNX Series Specifications

General

Management Interface	Unisphere
Drive Support	SAS, NL-SAS, Flash (SSD)
RAID Levels	RAID 0, 1, 3, 5, 6
Protocols Supported	Fibre Channel, iSCSI, NFS, CIFS
Data Services	Deduplication, Compression, Snapshots, Replication
Processor	Intel Xeon
Operating System	VNX Operating Environment (block), VNX File Operating Environment (file)