Emerson 1410 - Page 44

36
Reference Manual
00809-0200-4410, Rev BC
Host Integration
July 2017
Host Integration
Figure 5-6. EtherNet/IP Communications Page
Table 5-3. System Settings>Protocols>Ethernet/IP
Terms Description
Assembly Object Type EtherNet/IP use Static assembly object.
EtherNet/IP TCP Port The TCP Port used to access EtherNet/IP TCP data directly from the Gateway.
EtherNet/IP UDP Ports The UDP Ports used to access EtherNet/IP UDP data directly from the Gateway.
Incorporate value’s associated status as error?
If the HART variable status indicates a critical failure or if there is a loss of
communications, it will be reported through the EtherNet/IP member.
Value reported for error (floating point)
Chooses what value is reported if the value’s associated status indicates a critical
failure. Only used if the Gateway is using float representation
NaN Not a number is reported if the value’s associated status indicates a critical failure.
+Inf Positive infinity is reported if the value’s associated status indicates a critical failure.
-Inf Negative infinity is reported if the value’s associated status indicates a critical failure.
Other
User defined value is reported if the value’s associated status indicates a critical
failure.
Value reported for error (native integer)
User defined value is reported if the value’s associated status indicates a critical
failure. Only used if the Gateway is using integer representation.