37
Reference Manual
00809-0200-4410, Rev BC
Host Integration
July 2017
Host Integration
Figure 5-7. EtherNet/IP Register Map Page
Terms Description
Unmapped parameter read response
This is the value returned by the Gateway if the EtherNet/IP master requests a
register with no data assigned to it (empty register). It is recommended this be set
to zero fill to prevent errors.
Parameter mapping
Register Mapping is the process of assigning data points from wireless field devices
to EtherNet/IP registers. These registers can then be read by a EtherNet/IP master or
client. EtherNet/IP register mapping can be found by navigating to System
Settings>Protocols>Ethernet/IP.
Table 5-3. System Settings>Protocols>Ethernet/IP
To Next Page
Loading...
