Emerson Bettis XTE3000 Maintenance Instruction

Installation, Operation and Maintenance Manual
MDE 257 Rev. 1
February 2022
1
Introduction
Section 1: Introduction
Section 1: Introduction
This manual should be used in conjunction with the Installation, Operation and Maintenance Manual
(IOM) of the XTE3000.
This manual supplies an additional set of instructions for service and troubleshooting and describes
the parameters available in the RESTRICTED MENU.
The routines contained within the RESTRICTED menu can significantly modify the functionality of
the actuator; therefore, access to and utilization of the RESTRICTED menu should be limited to only
trained and authorized technicians.
If any parameter in the RESTRICTED menu is changed, power must be cycled on the actuator for the
changes to take effect.

Emerson Bettis XTE3000 Specifications

General

Brand	Emerson
Model	Bettis XTE3000
Category	Controller
Language	English