Emerson Damcos - Replace Pump in LPU

Damcos LPU: Replace Pump in LPU Service Manual
February 2017 SM 8000-100-01 Ed 04
93
Replace Pump in LPU
Note! If permanently mounted hand pump is connected, close stop valves for hand pump if
mounted in system.
Replace Pump in LPU
1. Oil tank is emptied by removing plug at bottom of
tank or valve block.
2. Remove 4 pcs M8-screw and remove the tank.
3. Valve block with pump is removed from LPU. 4. Remove suction pipe from valve block by means of
Allen key.
5. Press out the pump stator through suction pipe
hole.
6. Remove the rotor.
cont...