Display units (UnitS)Figure 5-8:
Select the following units as the base units for rate, total, and grand total. Select the time
base for rate and a multiplier for total and grand total units separately.
Display units descriptionTable 5-4:
Unit Display Description
Gallons GAL Set units as gallons
Liters L Set units as liters
Imperial gallons IGAL Set units as imperial gallons
Meters cubed M3 Set units as cubic meters
Barrels BBL Set units as barrels
Bushels BUSH Set units as bushels
Cubic yards cuYD Set units as cubic yards
Cubic feet cuFt Set units as cubic feet
Cubic inches cuIn Set units as inches
Liquid barrels LIBBL Set units as liquid barrels
Beer barrels BBBL Set units as beer barrels
Hectoliter HECtl Set units as hectoliters
Custom unit CUSt Use a custom unit
Set the time base (tbASE)
The meter calculates the rate based on rate time base and rate display units. The time base
is the unit of time used to calculate the rate, set as units per second, minute, hour, or day.
Setup and programming
User manual 41
To Next Page
Loading...
