Custom (CUSTOM)Figure 6-16:
To add a menu or parameter to the menu structure, or change the default menus, press
Enter at the desired menu in the position (POS) to be edited, and use the Up or Right
arrows to select the desired menu item for that position. See table Custom menu
parameters for a complete list of the available menu selections for each position.
Custom menu parametersTable 6-3:
Display Parameter/Menu Action
NONE None Set no menu position display
InPut Input Set to show Input menu
KFACTOR K-Factor Set to show K-Factor menu
UNITS Units Select standard units or custom unit/tag
DECIMAL Decimal Set to show Decimal menu
DISPLAy Display Set to show Display menu
A OUT Analog output Set to show Analog output menu
RATEDP Rate decimal
point
Set to show Rate decimal point menu
TOTALDP Total decimal
point
Set to show Total decimal point menu
GRTOTDP Grand total deci-
mal point
Set the show Grand total decimal point menu
SCALE Scale Set to show Scale menu
Product advanced features
User manual 77
To Next Page
Loading...
