Local display labels, descriptions and valid units (continued)Table 4-1:
Local display labels, descriptions and valid units
SOS — Average sound velocity
• Ft/S – Feet per Second
• M/S – Meters per Second
TEMP — Flow-condition temperature
• DEGF – Degrees Fahrenheit
• DEGC – Degrees Celsius
PRESS — Flow-condition pressure
• PSI – Pound per square inch
• MPA – Megapascals
FRQ1A — Frequency channel 1A
• HZ – Hertz
FRQ1B — Frequency channel 1B
• HZ – Hertz
KFCT1 — Frequency 1 K-factor
• CF – Cubic Feet
• CM –Cubic Meters
• MCF – Thousand Cubic Feet
• MCM –Thousand Cubic Meters
FRQ2A — Frequency channel 2A
• HZ – Hertz
FRQ2B — Frequency channel 2B
• HZ – Hertz
KFCT2 — Frequency 2 K-factor
• CF – Cubic Feet
• CM –Cubic Meters
• MCF – Thousand Cubic Feet
• MCM –Thousand Cubic Meters
AO1 — Analog Output 1 current
• MA – Milliamperes
AO2 — Analog Output 2 current
• MA – Milliamperes
Note
When connected to a meter with the local display option, reverse flow direction is indicated with a
minus sign (negative) before the value(s) shown on the local display.
Configuration
Installation manual 93
To Next Page
Loading...
Need help?
General
